Home Products About ContactFAQ [email protected]

Home › Medical grade polymers

Medical Grade Polymers

Reference pages for the medical grade grades we hold — the polymers, the manufacturers behind them, and the standards each grade is qualified to. These are reference pages, not a document repository: no TDS or SDS downloads appear here, and we do not claim coverage we cannot evidence.

8
Grades
6
Manufacturers
7
Standards confirmed
4
Standards pending

By polymer

AbbreviationMaterialGradesManufacturersStandards confirmedStandards pendingFAQ items
PS Polystyrene 5 4 5 1 pending 7
TPU Thermoplastic Polyurethane 3 2 2 3 pending 7

PS — Polystyrene

通用塑料站收录的医疗级聚苯乙烯。GPPS 用于药瓶/培养皿/诊断载具,HIPS 用于包装与医用包装托盘。

Confirmed standards (5):

Pending verification (1):

Read the full PS medical grade reference ›

TPU — Thermoplastic Polyurethane

通用塑料站收录的医疗级 TPU。脂肪族 TPU 用于血液接触与导管,聚酯型用于需要耐水解的场景,聚醚型耐候但耐水解较差。

Confirmed standards (2):

Pending verification (3):

Read the full TPU medical grade reference ›

Choosing a medical grade: the five questions that decide it

The tables above are the short answer. The working answer is longer: "medical grade" is not one thing. It is a set of named standards, each attached to a specific grade, and the grade you need follows from how the part touches the body and for how long. This section is the selection logic we work from when a customer asks us to quote.

What we cover here is deliberately limited to what our own records support: 5 PS grades and 3 TPU grades, from 4 and 2 manufacturers respectively. Where something is still unverified, it is marked pending rather than written up as coverage.

1. The standards you will actually meet

A grade is a manufacturer-specific resin designation — the thing you actually order. Above it sits the compliance framework, and on the grades listed here that framework comes in three families that answer three different questions:

They do not substitute for one another. A grade qualified to USP Class VI is not thereby qualified to ISO 10993, and a grade qualified to a food-contact clearance is not thereby a biocompatibility statement. Different bodies, different test programmes, different documents.

Some of these standards are still open on our side, and we say so on the page rather than in small print: ISO 10993-1:2025 is pending for the PS grades, while USP Class VI, FDA 21 CFR 177.2600 and the food-contact family (LFGB / GB 4806.7 / EU 10/2011) are pending for the TPU grades.

2. The applications that genuinely need a medical grade

The deciding factor is not what the part is called, it is what it touches. A device that meets skin for a few hours and an implant that sits in permanent contact with blood are evaluated under different requirements, and the standard follows the contact.

Which is also why a medical-grade resin buys you nothing for a part that only ever sits in a shipping carton. Knowing where the boundary sits is part of the selection.

3. The four things to pin down before you order

  1. The grade designation. Manufacturer plus code — 500W, STYRON 685D, Tecoflex EG-68D-B20 and so on. We quote what the record says for that code; we do not quote what sounds equivalent.
  2. The standard, and the part of it. Name it exactly. "ISO 10993" is not a request we can act on; "ISO 10993 Part 4" for a blood-contact line, or "USP Class VI" for a drug packaging contact, is. Each part is a separate test programme with separate documents, and a grade carrying one family of documentation is not a substitute for a grade carrying yours.
  3. The supplier behind the grade. The grades on this page come from named manufacturers — 4 for PS and 2 for TPU — and the documentation belongs to that manufacturer's grade, not to the polymer in general. Changing supplier changes the paperwork as well as the price.
  4. The documents you need. Our document index currently covers the specialty engineering polymers, and our compliance records for PS and TPU do not carry a TDS or SDS attachment, so this page publishes no downloads. We do not list documents we do not hold. Tell us the grade and the document type and we will tell you honestly whether we can supply it. Where a standard is still pending for that grade, we will confirm the current status in writing before you order — or tell you plainly that we cannot yet support it.

4. How this differs from a general-purpose listing

5. What to send us for a quote

Eight items, in the order we would ask for them:

  1. The application. What the part does, and what it touches — skin, blood, body fluid, food, or nothing at all.
  2. Contact duration. Minutes, days, or permanent indwelling. This single answer changes which part of ISO 10993 applies.
  3. The medium and the environment. Aqueous, alcohol-based disinfectant or oil; dry or continuously wet; the storage temperature range you need it to hold.
  4. The standards you must evidence. Give the standard and the part number, exactly as they appear in your qualification plan.
  5. Whether the part sits inside powered equipment. If a UL listed enclosure is involved, say so and we will check whether the grade carries a recognition.
  6. Processing. Injection moulding, extrusion, blow moulding or film; and if your process sterilises the part, say so — it changes which family we would propose.
  7. Quantity and packaging. Trial batch or production volume; we quote in the unit you need.
  8. Brand preference, or open to alternatives. If you need a specific manufacturer's grade, say which one. If an equivalent from another manufacturer is acceptable, say that too and we will spell out the technical differences instead of quietly substituting.

We reply within 24 hours. If one of the standards you name is still pending on our side, you will hear that in the first reply rather than after the order is placed.

Where a standard is marked pending, we do not claim the grade is qualified to it. If your qualification process requires that particular citation, tell us and we will confirm the current status in writing before you order — or tell you plainly that we cannot yet support it.

Request a Quote

Tell us the grade designation, the application (contact type and duration), and the quantity. If you need a specific standard documented, name it — we will confirm whether we can evidence it rather than assuming. We reply within 24 hours.

Request Quote (24h reply)

Related