Home Products About ContactFAQ [email protected]

Home › Medical grade polymers › PS

PS Medical Grade — Polystyrene

通用塑料站收录的医疗级聚苯乙烯。GPPS 用于药瓶/培养皿/诊断载具,HIPS 用于包装与医用包装托盘。

What this page is. A reference of PS medical grades, the manufacturers behind them and the standards each one is qualified to. What it is not — a document repository. See the data limitations at the bottom of this page before relying on it.
5
Grades
4
Manufacturers
5
Standards confirmed
1
Standards pending

Grades

GradeManufacturerFamilyStandards
Polystyrene 500W TotalEnergies GPPS USP Class VI FDA 21 CFR 177.1640
Polystyrene 536W TotalEnergies GPPS USP Class VI FDA 21 CFR 177.1640
PS 1300 / 1301 INEOS Styrolution GPPS FDA 21 CFR 177.1640 USP Class VI UL E57787
STYRON 685D Trinseo HIPS FDA 21 CFR 177.1640 USP Class VI UL E326906
General Polystyrene (CAS 9003-53-6) not manufacturer-specific GPPS (generic) FDA 21 CFR 177.1640 FDA 21 CFR 175.105

Manufacturers

ManufacturerNotes
TotalEnergies TotalEnergies 分销的 GPPS 医疗级牌号
INEOS Styrolution 原 Styrolution,欧洲 styrene 系主要供应商
Trinseo STYRON 系列 GPPS / HIPS
善德宸信 (Suntek Plas) 中文技术资料来源,主要贡献 ISO 10993-1:2025 版本说明

Reading the Compliance Columns

Three different systems appear on this page and they answer different questions. Confusing them is the most common error we see in incoming enquiries, so it is worth stating plainly:

A grade may hold one, two or all three. Holding all three is the norm for components that both touch food and sit inside powered equipment — drug delivery pump housings, for instance.

Standards Confirmed

StandardGradesWhichWhat it governs
USP Class VI 4 500W, 536W, PS 1300/1301, STYRON 685D 美国药典生物学评价,要求成品聚合物完成完整毒理学研究。医疗级 PS 的基础门槛之一。
FDA 21 CFR 177.1640 5 500W, 536W, PS 1300/1301, STYRON 685D, GEN-PS 美国食品接触物质条例中针对苯乙烯聚合物(polystyrene)的专门条款,规定可用于食品接触的配方与工艺条件。
FDA 21 CFR 175.105 1 GEN-PS 覆盖粘合剂、涂料等间接添加的食品接触材料。与 177.1640 的分工:前者管聚合物本体,后者管配方与添加剂。
UL E57787 1 PS 1300/1301 UL 认可编号。UL 牌号是电器/医疗外壳类应用的额外门槛,与 FDA 认证是不同体系。
UL E326906 1 STYRON 685D 同上,Trinseo STYRON 685D 的 UL 认可编号。

Standards Pending Verification

We list these rather than omitting them, because you should know they exist and that we have not yet confirmed them for these grades. Claiming coverage we cannot evidence would be worse than saying nothing.

StandardGradesStatusWhat it governs
ISO 10993-1:2025 pending 0 not yet confirmed ISO 10993-1:2025 第六版。ISO 10993 是一整套生物相容性系列,Part 1 规定通则与评价流程,后续 Part 3/5/6/10-12 分别对应细胞毒性、致敏、刺激、系统毒性与发热等试验项。

Data Limitations

Stated up front so you can judge how far to rely on this page:

Where a standard is marked pending, we do not claim the grade is qualified to it. If your qualification process requires that particular citation, tell us and we will confirm the current status in writing before you order — or tell you plainly that we cannot yet support it.

Frequently Asked Questions

What is PS used for in medical devices?

通用塑料站收录的医疗级聚苯乙烯。GPPS 用于药瓶/培养皿/诊断载具,HIPS 用于包装与医用包装托盘。

Which PS grades do you list?

5 grades from 4 manufacturers. The table above lists each grade, its manufacturer, its polymer family (GPPS / HIPS / aliphatic / polyester) and the standards it is qualified to.

Do you supply the TDS and SDS for these grades?

Not from this page — this is a reference page, not a document repository. Our document index currently covers the specialty engineering polymers. Tell us the grade designation and the document type you need and we will tell you honestly whether we can supply it. We do not list documents we do not hold.

What is the difference between GPPS and HIPS?

GPPS (general purpose polystyrene) is rigid and transparent — used for drug vials, culture dishes and diagnostic trays where clarity matters. HIPS (high impact polystyrene) is rubber-modified and opaque — used for medical packaging trays and cases where drop resistance matters. The grades on this page cover both.

Is USP Class VI the same as ISO 10993?

No — they are two separate systems from different bodies. USP Class VI is the United States Pharmacopeia biological evaluation for plastics used with drugs and medical devices, requiring a complete toxicity study on the finished polymer. ISO 10993 is the international biocompatibility series; Part 1 sets out the general requirements and framework, and Parts 3/4/5/6/10/11/12 cover cytotoxicity, haemolysis, sensitisation, irritation, systemic toxicity and pyrogen testing individually. A grade qualified to one is not automatically qualified to the other.

Does a UL recognition number matter for medical parts?

It depends on the part. A UL recognition (such as UL E57787 or UL E326906) is required when the component sits inside a listed electrical enclosure — some diagnostic and monitoring equipment qualifies. It is a separate system from FDA food-contact clearance and from USP Class VI; each answers a different question.

Can you cross-reference to an alternative supplier?

Yes. For PS the practical alternates differ by application — the list on this page covers what we have verified. Send us the grade you currently use and the application, and we will quote equivalents from other manufacturers and spell out the technical differences.

Request PS Medical Grade

Tell us the grade designation, the application (contact type and duration), and the quantity. If you need a specific standard documented, name it — we will confirm whether we can evidence it rather than assuming. We reply within 24 hours.

Request Quote (24h reply)

Related