PP RCP 无规共聚 PP · PP Random Copolymer
透明容器、医疗器械
About This Grade
PP RCP (无规共聚 PP, PP Random Copolymer) — PP is one of the most widely used commodity thermoplastics, offering the lowest density (0.90 g/cm³), excellent chemical resistance, good fatigue resistance, and high heat deflection. Available in hom
Key Applications
- Food packaging containers
- Automotive interior
- Textile nonwoven
- Pipe & fittings
Other PP Grades
| Grade | 中文名 | English Name | Note |
|---|---|---|---|
| PP Homo | 均聚 PP | PP Homopolymer | 编织袋、打包带、注塑容器 | |
| PP Copo | 共聚 PP | PP Copolymer | 汽车保险杠、家电外壳 | |
| PP GF30 | PP 30% 玻纤 | PP 30% Glass Fiber | 高刚性结构件、电池外壳 | |
Related Grades
Choosing within the PP range
PP is one of 4 grades we catalogue in this family, and they are not interchangeable. The differences between them are not marketing variations: they are different formulations solving different problems, and picking the wrong one shows up later as a warpage, a creep, or a connector that will not hold its seating.
This page covers PP RCP (PP Random Copolymer). The grades listed below are the other options in the same family, and each one is a deliberate step away from the plain grade.
| Grade | Name | Where it is used | |
|---|---|---|---|
| PP Homo | PP Homopolymer | 编织袋、打包带、注塑容器 | details › |
| PP Copo | PP Copolymer | 汽车保险杠、家电外壳 | details › |
| PP GF30 | PP 30% Glass Fiber | 高刚性结构件、电池外壳 | details › |
Two practical rules when reading that table. First, a reinforced grade is not simply a better grade — glass fibre changes the shrinkage and the flow, so a reinforced grade usually means a different mould, not the same mould with better resin. Second, where a family offers both a flame-retardant and a plain grade, the flame retardant is the one to specify if the part ends up inside a powered enclosure, and the plain grade is the cheaper answer everywhere else. If the application does not decide it for you, tell us the end use and we will work back to the grade.
We would rather quote you the grade that fits than the grade that is easiest for us to ship.
What this grade is for
- Food packaging containers — the application this grade is catalogued for. If your part does something else, say so and we will check the fit rather than assume it.
- Automotive interior — the application this grade is catalogued for. If your part does something else, say so and we will check the fit rather than assume it.
- Textile nonwoven — the application this grade is catalogued for. If your part does something else, say so and we will check the fit rather than assume it.
- Pipe & fittings — the application this grade is catalogued for. If your part does something else, say so and we will check the fit rather than assume it.
Every PP grade in our catalogue is filed against the same application set, because the family itself, not the individual variant, determines where it goes. The variant decides how it behaves there — how stiff it is, how it flows, how it handles heat. That is why the note above is the one-line answer and the rest of this page is the reasoning.
The family behind this grade
PP is one of the most widely used commodity thermoplastics, offering the lowest density (0.90 g/cm³), excellent chemical resistance, good fatigue resistance, and high heat deflection. Available in hom
In practice the family shows up in food packaging containers/closures (H-PP), non-woven fabrics (meltblown/spunbond), automotive interior trims/bumpers and the wider set of 5 applications the PP plant is qualified for. The material we quote is drawn from LyondellBasell Moplen HP500N/H110ME, Borealis Borouge PP, ExxonMobil Achieve PP and comparable sources — the specific manufacturer is confirmed against your order rather than assumed in advance.
How the same application is solved in other families
The applications below are not exclusive to PP. Where another family solves them too, that is usually the more useful comparison for you, because it tells you what you are trading away when you settle on PP.
| Application | Families covering it | Other options |
|---|---|---|
| Food packaging containers | 1 | only offered in this family |
| Automotive interior | 1 | only offered in this family |
| Textile nonwoven | 1 | only offered in this family |
| Pipe & fittings | 1 | only offered in this family |
Documentation and supply
Compliance for PP RCP is recorded as EU 2011/65/EU, EU 1907/2006 — each one attaches to this grade, not to the polymer in general.
Where a standard is still open on our side we say so before you order rather than after. Ask us for the specific document type and grade and we will tell you plainly what we can and cannot supply.
Family reference properties
The figures below are the PP family reference values, not the measured properties of PP RCP itself. A grade moves away from the family according to its formulation — reinforcement, flame retardant and filler content all change these numbers. This is exactly why each grade sheet carries its own values, and why the grade sheet is what we quote from.
| Property | Reference value | Test standard |
|---|---|---|
| Density | 0.91 g/cm³ | ISO 1183 |
| Tensile Strength | 35 MPa | ISO 527 |
| Flexural Modulus | 1500 MPa | ISO 178 |
| Heat Deflection Temperature (HDT) | 110°C | ISO 75 |
| Continuous Use Temperature | 100°C | UL 746B |
| Flammability Rating | UL94 HB | UL 94 |
Measured properties for PP RCP
These are the values recorded against PP RCP itself, taken from its own technical data sheet and shown with the standard each was measured under. A number without its standard is not comparable between suppliers, which is why the standard sits next to every figure. Where the datasheet gives a range, the range is reproduced as reported rather than collapsed to a single number.
| Property | Value | Test standard |
|---|---|---|
| Density | 0.905 g/cm³ | ISO 1183 |
| Tensile Strength | 30 MPa | ISO 527-1 |
| Tensile Modulus | 1100 MPa | ISO 527-1 |
| Elongation at Break | 50 % | ISO 527-1 |
| Heat Deflection Temperature (HDT) | 72 °C | ASTM D1003 |
| Melt Flow Rate | 10.5 g/10 min | ISO 1133 |
| Haze | 3 % | ASTM D1003 |
These are grade-specific values rather than family reference figures. Where a property is missing from this table, we do not hold a recorded value for it on this grade — we leave it out rather than fill the gap with a family number.
Supply terms for PP sit in the commodity pricing band, sold as PP pellets in 25 kg bags, FOB Shanghai, normally ready to ship within 5 working days, with a minimum order of 1000 kg. Test samples are available against a live enquiry.
Request a quote — 24h replySupply Information
Huizhou Lingli Trading supplies PP grades in 25kg bags, FOB Shanghai. TDS on request; RoHS / REACH documentation availability is recorded per grade — see above. MOQ 100kg, samples for testing.
Request Quote (24h reply)Why Huizhou Lingli Trading
- Direct sourcing from China tier-1 producers
- Multi-grade inventory in Shanghai bonded warehouse
- FOB Shanghai, CIF main ports worldwide
- Free sample for qualified buyers
- 24h quote, 7-day sample dispatch