Home Products About ContactFAQ [email protected]

Home › PP › PP GF30

PP GF30 PP 30% 玻纤 · PP 30% Glass Fiber

高刚性结构件、电池外壳

About This Grade

PP GF30 (PP 30% 玻纤, PP 30% Glass Fiber) — PP is one of the most widely used commodity thermoplastics, offering the lowest density (0.90 g/cm³), excellent chemical resistance, good fatigue resistance, and high heat deflection. Available in hom

Key Applications

Other PP Grades

Grade中文名English NameNote
PP Homo均聚 PPPP Homopolymer编织袋、打包带、注塑容器 |
PP Copo共聚 PPPP Copolymer汽车保险杠、家电外壳 |
PP RCP无规共聚 PPPP Random Copolymer透明容器、医疗器械 |

Related Grades

Choosing within the PP range

PP is one of 4 grades we catalogue in this family, and they are not interchangeable. The differences between them are not marketing variations: they are different formulations solving different problems, and picking the wrong one shows up later as a warpage, a creep, or a connector that will not hold its seating.

This page covers PP GF30 (PP 30% Glass Fiber). The grades listed below are the other options in the same family, and each one is a deliberate step away from the plain grade.

GradeNameWhere it is used
PP HomoPP Homopolymer编织袋、打包带、注塑容器details ›
PP CopoPP Copolymer汽车保险杠、家电外壳details ›
PP RCPPP Random Copolymer透明容器、医疗器械details ›

Two practical rules when reading that table. First, a reinforced grade is not simply a better grade — glass fibre changes the shrinkage and the flow, so a reinforced grade usually means a different mould, not the same mould with better resin. Second, where a family offers both a flame-retardant and a plain grade, the flame retardant is the one to specify if the part ends up inside a powered enclosure, and the plain grade is the cheaper answer everywhere else. If the application does not decide it for you, tell us the end use and we will work back to the grade.

We would rather quote you the grade that fits than the grade that is easiest for us to ship.

What this grade is for

Every PP grade in our catalogue is filed against the same application set, because the family itself, not the individual variant, determines where it goes. The variant decides how it behaves there — how stiff it is, how it flows, how it handles heat. That is why the note above is the one-line answer and the rest of this page is the reasoning.

The family behind this grade

PP is one of the most widely used commodity thermoplastics, offering the lowest density (0.90 g/cm³), excellent chemical resistance, good fatigue resistance, and high heat deflection. Available in hom

In practice the family shows up in food packaging containers/closures (H-PP), non-woven fabrics (meltblown/spunbond), automotive interior trims/bumpers and the wider set of 5 applications the PP plant is qualified for. The material we quote is drawn from LyondellBasell Moplen HP500N/H110ME, Borealis Borouge PP, ExxonMobil Achieve PP and comparable sources — the specific manufacturer is confirmed against your order rather than assumed in advance.

How the same application is solved in other families

The applications below are not exclusive to PP. Where another family solves them too, that is usually the more useful comparison for you, because it tells you what you are trading away when you settle on PP.

ApplicationFamilies covering itOther options
Food packaging containers1only offered in this family
Automotive interior1only offered in this family
Textile nonwoven1only offered in this family
Pipe & fittings1only offered in this family

Documentation and supply

Compliance for PP GF30 is recorded as EU 2011/65/EU, EU 1907/2006 — each one attaches to this grade, not to the polymer in general.

Where a standard is still open on our side we say so before you order rather than after. Ask us for the specific document type and grade and we will tell you plainly what we can and cannot supply.

Family reference properties

The figures below are the PP family reference values, not the measured properties of PP GF30 itself. A grade moves away from the family according to its formulation — reinforcement, flame retardant and filler content all change these numbers. This is exactly why each grade sheet carries its own values, and why the grade sheet is what we quote from.

PropertyReference valueTest standard
Density0.91 g/cm³ISO 1183
Tensile Strength35 MPaISO 527
Flexural Modulus1500 MPaISO 178
Heat Deflection Temperature (HDT)110°CISO 75
Continuous Use Temperature100°CUL 746B
Flammability RatingUL94 HBUL 94

Measured properties for PP GF30

These are the values recorded against PP GF30 itself, taken from its own technical data sheet and shown with the standard each was measured under. A number without its standard is not comparable between suppliers, which is why the standard sits next to every figure. Where the datasheet gives a range, the range is reproduced as reported rather than collapsed to a single number.

PropertyValueTest standard
Density1.11 g/cm³as reported
Tensile Strength108.94 MPaASTM D638
Tensile Modulus6210 MPaASTM D638
Flexural Modulus5520 MPaASTM D790
Flexural Strength161.34 MPaASTM D790
Elongation at Break2 - 3 %as reported

These are grade-specific values rather than family reference figures. Where a property is missing from this table, we do not hold a recorded value for it on this grade — we leave it out rather than fill the gap with a family number.

Supply terms for PP sit in the commodity pricing band, sold as PP pellets in 25 kg bags, FOB Shanghai, normally ready to ship within 5 working days, with a minimum order of 1000 kg. Test samples are available against a live enquiry.

Request a quote — 24h reply

Supply Information

Huizhou Lingli Trading supplies PP grades in 25kg bags, FOB Shanghai. TDS on request; RoHS / REACH documentation availability is recorded per grade — see above. MOQ 100kg, samples for testing.

Request Quote (24h reply)

Why Huizhou Lingli Trading