Home Products About ContactFAQ [email protected]

Home › PE › HDPE Pipe

HDPE Pipe HDPE 管材级 · HDPE Pipe Grade PE100

给水管、燃气管

About This Grade

HDPE Pipe (HDPE 管材级, HDPE Pipe Grade PE100) — PE is the highest-volume commodity thermoplastic globally, with multiple density variants: HDPE for rigid applications, LDPE for films, LLDPE for stretch film, UHMWPE for extreme wear resistance. Exce

Key Applications

Other PE Grades

Grade中文名English NameNote
HDPE BlowHDPE 吹塑级HDPE Blow Molding中空容器、桶、瓶 |
LDPE FilmLDPE 薄膜级LDPE Film Grade包装膜、农膜、内衬袋 |
LLDPE FilmLLDPE 薄膜级LLDPE Film Grade拉伸缠绕膜、重包装袋 |
UHMWPE超高分子量聚乙烯UHMWPE耐磨衬板、传送带、医疗植入物 |

Related Grades

Choosing within the PE range

PE is one of 5 grades we catalogue in this family, and they are not interchangeable. The differences between them are not marketing variations: they are different formulations solving different problems, and picking the wrong one shows up later as a warpage, a creep, or a connector that will not hold its seating.

This page covers HDPE Pipe (HDPE Pipe Grade PE100). The grades listed below are the other options in the same family, and each one is a deliberate step away from the plain grade.

GradeNameWhere it is used
HDPE BlowHDPE Blow Molding中空容器、桶、瓶details ›
LDPE FilmLDPE Film Grade包装膜、农膜、内衬袋details ›
LLDPE FilmLLDPE Film Grade拉伸缠绕膜、重包装袋details ›
UHMWPEUHMWPE耐磨衬板、传送带、医疗植入物details ›

Two practical rules when reading that table. First, a reinforced grade is not simply a better grade — glass fibre changes the shrinkage and the flow, so a reinforced grade usually means a different mould, not the same mould with better resin. Second, where a family offers both a flame-retardant and a plain grade, the flame retardant is the one to specify if the part ends up inside a powered enclosure, and the plain grade is the cheaper answer everywhere else. If the application does not decide it for you, tell us the end use and we will work back to the grade.

We would rather quote you the grade that fits than the grade that is easiest for us to ship.

What this grade is for

Every PE grade in our catalogue is filed against the same application set, because the family itself, not the individual variant, determines where it goes. The variant decides how it behaves there — how stiff it is, how it flows, how it handles heat. That is why the note above is the one-line answer and the rest of this page is the reasoning.

The family behind this grade

PE is the highest-volume commodity thermoplastic globally, with multiple density variants: HDPE for rigid applications, LDPE for films, LLDPE for stretch film, UHMWPE for extreme wear resistance. Exce

In practice the family shows up in agricultural greenhouse film (LDPE/LLDPE), pressure pipes/gas distribution (HDPE PE100), shopping bags/stretch film packaging and the wider set of 5 applications the PE plant is qualified for. The material we quote is drawn from LyondellBasell Lupolen/Petrothene, Borealis Borstar HE2441, SABIC HDPE CC2056 and comparable sources — the specific manufacturer is confirmed against your order rather than assumed in advance.

How the same application is solved in other families

The applications below are not exclusive to PE. Where another family solves them too, that is usually the more useful comparison for you, because it tells you what you are trading away when you settle on PE.

ApplicationFamilies covering itOther options
Packaging film & bags1only offered in this family
Pipe & tubing1only offered in this family
Bottles & containers1only offered in this family
Toys & houseware1only offered in this family

Documentation and supply

Compliance for HDPE Pipe is recorded as EU 2011/65/EU, EU 1907/2006 — each one attaches to this grade, not to the polymer in general.

Where a standard is still open on our side we say so before you order rather than after. Ask us for the specific document type and grade and we will tell you plainly what we can and cannot supply.

Family reference properties

The figures below are the PE family reference values, not the measured properties of HDPE Pipe itself. A grade moves away from the family according to its formulation — reinforcement, flame retardant and filler content all change these numbers. This is exactly why each grade sheet carries its own values, and why the grade sheet is what we quote from.

PropertyReference valueTest standard
Density0.95 g/cm³ISO 1183
Tensile Strength25 MPaISO 527
Flexural Modulus1100 MPaISO 178
Heat Deflection Temperature (HDT)80°CISO 75
Continuous Use Temperature80°CUL 746B
Flammability RatingUL94 HBUL 94

Measured properties for HDPE Pipe

These are the values recorded against HDPE Pipe itself, taken from its own technical data sheet and shown with the standard each was measured under. A number without its standard is not comparable between suppliers, which is why the standard sits next to every figure. Where the datasheet gives a range, the range is reproduced as reported rather than collapsed to a single number.

PropertyValueTest standard
Density0.946 g/cm³ASTM D1505
Flexural Modulus1000 MPaASTM D790A
Elongation at Break750 %as reported
Vicat Softening Point130 °CASTM D1525
Heat Deflection Temperature (HDT)77 °CASTM D648
Melting Point132 °CASTM D3418
Melt Flow Rate1.1 g/10 minASTM D1238

These are grade-specific values rather than family reference figures. Where a property is missing from this table, we do not hold a recorded value for it on this grade — we leave it out rather than fill the gap with a family number.

Supply terms for PE sit in the commodity pricing band, sold as PE pellets in 25 kg bags, FOB Shanghai, normally ready to ship within 5 working days, with a minimum order of 1000 kg. Test samples are available against a live enquiry.

Request a quote — 24h reply

Supply Information

Huizhou Lingli Trading supplies PE grades in 25kg bags, FOB Shanghai. TDS on request; RoHS / REACH documentation availability is recorded per grade — see above. MOQ 100kg, samples for testing.

Request Quote (24h reply)

Why Huizhou Lingli Trading