HDPE Blow HDPE 吹塑级 · HDPE Blow Molding
中空容器、桶、瓶
About This Grade
HDPE Blow (HDPE 吹塑级, HDPE Blow Molding) — PE is the highest-volume commodity thermoplastic globally, with multiple density variants: HDPE for rigid applications, LDPE for films, LLDPE for stretch film, UHMWPE for extreme wear resistance. Exce
Key Applications
- Packaging film & bags
- Pipe & tubing
- Bottles & containers
- Toys & houseware
Other PE Grades
| Grade | 中文名 | English Name | Note |
|---|---|---|---|
| HDPE Pipe | HDPE 管材级 | HDPE Pipe Grade PE100 | 给水管、燃气管 | |
| LDPE Film | LDPE 薄膜级 | LDPE Film Grade | 包装膜、农膜、内衬袋 | |
| LLDPE Film | LLDPE 薄膜级 | LLDPE Film Grade | 拉伸缠绕膜、重包装袋 | |
| UHMWPE | 超高分子量聚乙烯 | UHMWPE | 耐磨衬板、传送带、医疗植入物 | |
Related Grades
- HDPE Pipe — HDPE 管材级
- LDPE Film — LDPE 薄膜级
- LLDPE Film — LLDPE 薄膜级
Choosing within the PE range
PE is one of 5 grades we catalogue in this family, and they are not interchangeable. The differences between them are not marketing variations: they are different formulations solving different problems, and picking the wrong one shows up later as a warpage, a creep, or a connector that will not hold its seating.
This page covers HDPE Blow (HDPE Blow Molding). The grades listed below are the other options in the same family, and each one is a deliberate step away from the plain grade.
| Grade | Name | Where it is used | |
|---|---|---|---|
| HDPE Pipe | HDPE Pipe Grade PE100 | 给水管、燃气管 | details › |
| LDPE Film | LDPE Film Grade | 包装膜、农膜、内衬袋 | details › |
| LLDPE Film | LLDPE Film Grade | 拉伸缠绕膜、重包装袋 | details › |
| UHMWPE | UHMWPE | 耐磨衬板、传送带、医疗植入物 | details › |
Two practical rules when reading that table. First, a reinforced grade is not simply a better grade — glass fibre changes the shrinkage and the flow, so a reinforced grade usually means a different mould, not the same mould with better resin. Second, where a family offers both a flame-retardant and a plain grade, the flame retardant is the one to specify if the part ends up inside a powered enclosure, and the plain grade is the cheaper answer everywhere else. If the application does not decide it for you, tell us the end use and we will work back to the grade.
We would rather quote you the grade that fits than the grade that is easiest for us to ship.
What this grade is for
- Packaging film & bags — the application this grade is catalogued for. If your part does something else, say so and we will check the fit rather than assume it.
- Pipe & tubing — the application this grade is catalogued for. If your part does something else, say so and we will check the fit rather than assume it.
- Bottles & containers — the application this grade is catalogued for. If your part does something else, say so and we will check the fit rather than assume it.
- Toys & houseware — the application this grade is catalogued for. If your part does something else, say so and we will check the fit rather than assume it.
Every PE grade in our catalogue is filed against the same application set, because the family itself, not the individual variant, determines where it goes. The variant decides how it behaves there — how stiff it is, how it flows, how it handles heat. That is why the note above is the one-line answer and the rest of this page is the reasoning.
The family behind this grade
PE is the highest-volume commodity thermoplastic globally, with multiple density variants: HDPE for rigid applications, LDPE for films, LLDPE for stretch film, UHMWPE for extreme wear resistance. Exce
In practice the family shows up in agricultural greenhouse film (LDPE/LLDPE), pressure pipes/gas distribution (HDPE PE100), shopping bags/stretch film packaging and the wider set of 5 applications the PE plant is qualified for. The material we quote is drawn from LyondellBasell Lupolen/Petrothene, Borealis Borstar HE2441, SABIC HDPE CC2056 and comparable sources — the specific manufacturer is confirmed against your order rather than assumed in advance.
How the same application is solved in other families
The applications below are not exclusive to PE. Where another family solves them too, that is usually the more useful comparison for you, because it tells you what you are trading away when you settle on PE.
| Application | Families covering it | Other options |
|---|---|---|
| Packaging film & bags | 1 | only offered in this family |
| Pipe & tubing | 1 | only offered in this family |
| Bottles & containers | 1 | only offered in this family |
| Toys & houseware | 1 | only offered in this family |
Documentation and supply
Compliance for HDPE Blow is recorded as EU 2011/65/EU, EU 1907/2006 — each one attaches to this grade, not to the polymer in general.
Where a standard is still open on our side we say so before you order rather than after. Ask us for the specific document type and grade and we will tell you plainly what we can and cannot supply.
Family reference properties
The figures below are the PE family reference values, not the measured properties of HDPE Blow itself. A grade moves away from the family according to its formulation — reinforcement, flame retardant and filler content all change these numbers. This is exactly why each grade sheet carries its own values, and why the grade sheet is what we quote from.
| Property | Reference value | Test standard |
|---|---|---|
| Density | 0.95 g/cm³ | ISO 1183 |
| Tensile Strength | 25 MPa | ISO 527 |
| Flexural Modulus | 1100 MPa | ISO 178 |
| Heat Deflection Temperature (HDT) | 80°C | ISO 75 |
| Continuous Use Temperature | 80°C | UL 746B |
| Flammability Rating | UL94 HB | UL 94 |
Measured properties for HDPE Blow
These are the values recorded against HDPE Blow itself, taken from its own technical data sheet and shown with the standard each was measured under. A number without its standard is not comparable between suppliers, which is why the standard sits next to every figure. Where the datasheet gives a range, the range is reproduced as reported rather than collapsed to a single number.
| Property | Value | Test standard |
|---|---|---|
| Density | 0.964 g/cm³ | ASTM D1505 |
| Tensile Strength | 32 MPa | ASTM D638 |
| Flexural Modulus | 1300 MPa | ASTM D790A |
| Elongation at Break | 1000 % | ASTM D638 |
| Vicat Softening Point | 129 °C | ASTM D1525 |
| Heat Deflection Temperature (HDT) | 80 °C | ASTM D648 |
| Melting Point | 132 °C | ASTM D3418 |
| Melt Flow Rate | 0.4 g/10 min | ASTM D1238 |
These are grade-specific values rather than family reference figures. Where a property is missing from this table, we do not hold a recorded value for it on this grade — we leave it out rather than fill the gap with a family number.
Supply terms for PE sit in the commodity pricing band, sold as PE pellets in 25 kg bags, FOB Shanghai, normally ready to ship within 5 working days, with a minimum order of 1000 kg. Test samples are available against a live enquiry.
Request a quote — 24h replySupply Information
Huizhou Lingli Trading supplies PE grades in 25kg bags, FOB Shanghai. TDS on request; RoHS / REACH documentation availability is recorded per grade — see above. MOQ 100kg, samples for testing.
Request Quote (24h reply)Why Huizhou Lingli Trading
- Direct sourcing from China tier-1 producers
- Multi-grade inventory in Shanghai bonded warehouse
- FOB Shanghai, CIF main ports worldwide
- Free sample for qualified buyers
- 24h quote, 7-day sample dispatch