Home Products About ContactFAQ [email protected]

Home › PBT › PBT GF15

PBT GF15 15% 玻纤增强 PBT · PBT 15% Glass Fiber

高刚性结构件、电气外壳

About This Grade

PBT GF15 (15% 玻纤增强 PBT, PBT 15% Glass Fiber) — PBT is a semi-crystalline engineering thermoplastic offering excellent dimensional stability, low moisture absorption, and outstanding electrical properties. PBT resin combines high strength with good

Key Applications

Other PBT Grades

Grade中文名English NameNote
PBT NatPBT 本色PBT Natural通用注塑连接器、继电器壳体 |
PBT GF3030% 玻纤增强 PBTPBT 30% Glass Fiber汽车连接器、线圈骨架 |
PBT FR阻燃 PBTPBT Flame Retardant V-0电气元件、UL94 V-0 应用 |
PBT UV耐紫外 PBTPBT UV Stabilized户外连接器、车外饰件 |

Related Grades

Choosing within the PBT range

PBT is one of 5 grades we catalogue in this family, and they are not interchangeable. The differences between them are not marketing variations: they are different formulations solving different problems, and picking the wrong one shows up later as a warpage, a creep, or a connector that will not hold its seating.

This page covers PBT GF15 (PBT 15% Glass Fiber). The grades listed below are the other options in the same family, and each one is a deliberate step away from the plain grade.

GradeNameWhere it is used
PBT NatPBT Natural通用注塑连接器、继电器壳体details ›
PBT GF30PBT 30% Glass Fiber汽车连接器、线圈骨架details ›
PBT FRPBT Flame Retardant V-0电气元件、UL94 V-0 应用details ›
PBT UVPBT UV Stabilized户外连接器、车外饰件details ›

Two practical rules when reading that table. First, a reinforced grade is not simply a better grade — glass fibre changes the shrinkage and the flow, so a reinforced grade usually means a different mould, not the same mould with better resin. Second, where a family offers both a flame-retardant and a plain grade, the flame retardant is the one to specify if the part ends up inside a powered enclosure, and the plain grade is the cheaper answer everywhere else. If the application does not decide it for you, tell us the end use and we will work back to the grade.

We would rather quote you the grade that fits than the grade that is easiest for us to ship.

What this grade is for

Every PBT grade in our catalogue is filed against the same application set, because the family itself, not the individual variant, determines where it goes. The variant decides how it behaves there — how stiff it is, how it flows, how it handles heat. That is why the note above is the one-line answer and the rest of this page is the reasoning.

The family behind this grade

PBT is a semi-crystalline engineering thermoplastic offering excellent dimensional stability, low moisture absorption, and outstanding electrical properties. PBT resin combines high strength with good

In practice the family shows up in automotive connector bodies, SMT power LED housings, white goods shells and the wider set of 5 applications the PBT plant is qualified for. The material we quote is drawn from SABIC Valox 310/325/420, DuPont Crastin SK/LW, BASF Ultradur B 4520/B 4300 and comparable sources — the specific manufacturer is confirmed against your order rather than assumed in advance.

How the same application is solved in other families

The applications below are not exclusive to PBT. Where another family solves them too, that is usually the more useful comparison for you, because it tells you what you are trading away when you settle on PBT.

ApplicationFamilies covering itOther options
Automotive connectors1only offered in this family
Electrical/Electronic housings1only offered in this family
Appliance components1only offered in this family
LED housings1only offered in this family

Documentation and supply

Compliance for PBT GF15 is recorded as EU 2011/65/EU, EU 1907/2006 — each one attaches to this grade, not to the polymer in general.

Where a standard is still open on our side we say so before you order rather than after. Ask us for the specific document type and grade and we will tell you plainly what we can and cannot supply.

Family reference properties

The figures below are the PBT family reference values, not the measured properties of PBT GF15 itself. A grade moves away from the family according to its formulation — reinforcement, flame retardant and filler content all change these numbers. This is exactly why each grade sheet carries its own values, and why the grade sheet is what we quote from.

PropertyReference valueTest standard
Density1.31 g/cm³ISO 1183
Tensile Strength55 MPaISO 527
Flexural Modulus2400 MPaISO 178
Heat Deflection Temperature (HDT)150°CISO 75
Continuous Use Temperature120°CUL 746B
Flammability RatingUL94 HBUL 94

Measured properties for PBT GF15

These are the values recorded against PBT GF15 itself, taken from its own technical data sheet and shown with the standard each was measured under. A number without its standard is not comparable between suppliers, which is why the standard sits next to every figure. Where the datasheet gives a range, the range is reproduced as reported rather than collapsed to a single number.

PropertyValueTest standard
Density1.53 g/cm³ASTM D792
Tensile Strength93.08 MPaASTM D638
Flexural Modulus4964.23 MPaASTM D790
Flexural Strength137.9 MPaASTM D790
Elongation at Break5 %ASTM D638
Heat Deflection Temperature (HDT)182.2 °CASTM D648

These are grade-specific values rather than family reference figures. Where a property is missing from this table, we do not hold a recorded value for it on this grade — we leave it out rather than fill the gap with a family number.

Supply terms for PBT sit in the mid-range engineering pricing band, sold as PBT pellets in 25 kg bags, FOB Shanghai, normally ready to ship within 5 working days, with a minimum order of 500 kg. Test samples are available against a live enquiry.

Request a quote — 24h reply

Supply Information

Huizhou Lingli Trading supplies PBT grades in 25kg bags, FOB Shanghai. TDS on request; RoHS / REACH documentation availability is recorded per grade — see above. MOQ 100kg, samples for testing.

Request Quote (24h reply)

Why Huizhou Lingli Trading