PBT FR 阻燃 PBT · PBT Flame Retardant V-0
电气元件、UL94 V-0 应用
About This Grade
PBT FR (阻燃 PBT, PBT Flame Retardant V-0) — PBT is a semi-crystalline engineering thermoplastic offering excellent dimensional stability, low moisture absorption, and outstanding electrical properties. PBT resin combines high strength with good
Key Applications
- Automotive connectors
- Electrical/Electronic housings
- Appliance components
- LED housings
Other PBT Grades
| Grade | 中文名 | English Name | Note |
|---|---|---|---|
| PBT Nat | PBT 本色 | PBT Natural | 通用注塑连接器、继电器壳体 | |
| PBT GF15 | 15% 玻纤增强 PBT | PBT 15% Glass Fiber | 高刚性结构件、电气外壳 | |
| PBT GF30 | 30% 玻纤增强 PBT | PBT 30% Glass Fiber | 汽车连接器、线圈骨架 | |
| PBT UV | 耐紫外 PBT | PBT UV Stabilized | 户外连接器、车外饰件 | |
Related Grades
Choosing within the PBT range
PBT is one of 5 grades we catalogue in this family, and they are not interchangeable. The differences between them are not marketing variations: they are different formulations solving different problems, and picking the wrong one shows up later as a warpage, a creep, or a connector that will not hold its seating.
This page covers PBT FR (PBT Flame Retardant V-0). The grades listed below are the other options in the same family, and each one is a deliberate step away from the plain grade.
| Grade | Name | Where it is used | |
|---|---|---|---|
| PBT Nat | PBT Natural | 通用注塑连接器、继电器壳体 | details › |
| PBT GF15 | PBT 15% Glass Fiber | 高刚性结构件、电气外壳 | details › |
| PBT GF30 | PBT 30% Glass Fiber | 汽车连接器、线圈骨架 | details › |
| PBT UV | PBT UV Stabilized | 户外连接器、车外饰件 | details › |
Two practical rules when reading that table. First, a reinforced grade is not simply a better grade — glass fibre changes the shrinkage and the flow, so a reinforced grade usually means a different mould, not the same mould with better resin. Second, where a family offers both a flame-retardant and a plain grade, the flame retardant is the one to specify if the part ends up inside a powered enclosure, and the plain grade is the cheaper answer everywhere else. If the application does not decide it for you, tell us the end use and we will work back to the grade.
We would rather quote you the grade that fits than the grade that is easiest for us to ship.
What this grade is for
- Automotive connectors — the application this grade is catalogued for. If your part does something else, say so and we will check the fit rather than assume it.
- Electrical/Electronic housings — the application this grade is catalogued for. If your part does something else, say so and we will check the fit rather than assume it.
- Appliance components — the application this grade is catalogued for. If your part does something else, say so and we will check the fit rather than assume it.
- LED housings — the application this grade is catalogued for. If your part does something else, say so and we will check the fit rather than assume it.
Every PBT grade in our catalogue is filed against the same application set, because the family itself, not the individual variant, determines where it goes. The variant decides how it behaves there — how stiff it is, how it flows, how it handles heat. That is why the note above is the one-line answer and the rest of this page is the reasoning.
The family behind this grade
PBT is a semi-crystalline engineering thermoplastic offering excellent dimensional stability, low moisture absorption, and outstanding electrical properties. PBT resin combines high strength with good
In practice the family shows up in automotive connector bodies, SMT power LED housings, white goods shells and the wider set of 5 applications the PBT plant is qualified for. The material we quote is drawn from SABIC Valox 310/325/420, DuPont Crastin SK/LW, BASF Ultradur B 4520/B 4300 and comparable sources — the specific manufacturer is confirmed against your order rather than assumed in advance.
How the same application is solved in other families
The applications below are not exclusive to PBT. Where another family solves them too, that is usually the more useful comparison for you, because it tells you what you are trading away when you settle on PBT.
| Application | Families covering it | Other options |
|---|---|---|
| Automotive connectors | 1 | only offered in this family |
| Electrical/Electronic housings | 1 | only offered in this family |
| Appliance components | 1 | only offered in this family |
| LED housings | 1 | only offered in this family |
Documentation and supply
Compliance for PBT FR is recorded as EU 2011/65/EU, EU 1907/2006 — each one attaches to this grade, not to the polymer in general.
Where a standard is still open on our side we say so before you order rather than after. Ask us for the specific document type and grade and we will tell you plainly what we can and cannot supply.
Family reference properties
The figures below are the PBT family reference values, not the measured properties of PBT FR itself. A grade moves away from the family according to its formulation — reinforcement, flame retardant and filler content all change these numbers. This is exactly why each grade sheet carries its own values, and why the grade sheet is what we quote from.
| Property | Reference value | Test standard |
|---|---|---|
| Density | 1.31 g/cm³ | ISO 1183 |
| Tensile Strength | 55 MPa | ISO 527 |
| Flexural Modulus | 2400 MPa | ISO 178 |
| Heat Deflection Temperature (HDT) | 150°C | ISO 75 |
| Continuous Use Temperature | 120°C | UL 746B |
| Flammability Rating | UL94 HB | UL 94 |
Measured properties for PBT FR
These are the values recorded against PBT FR itself, taken from its own technical data sheet and shown with the standard each was measured under. A number without its standard is not comparable between suppliers, which is why the standard sits next to every figure. Where the datasheet gives a range, the range is reproduced as reported rather than collapsed to a single number.
| Property | Value | Test standard |
|---|---|---|
| Density | 1.63 - 1.66 g/cm³ | ISO 1183 |
| Tensile Strength | 110 - 130 MPa | ISO 527-2 |
| Tensile Modulus | 9000 - 11000 MPa | ISO 527-2 |
| Elongation at Break | 2 - 3 % | ISO 527-2 |
| Vicat Softening Point | 210 °C | ISO 306 |
| Heat Deflection Temperature (HDT) | 205 °C | as reported |
| Melting Point | 225 °C | ISO 11357 |
| Mould Shrinkage | 0.3 - 1 % | ISO 294-4 |
These are grade-specific values rather than family reference figures. Where a property is missing from this table, we do not hold a recorded value for it on this grade — we leave it out rather than fill the gap with a family number.
Supply terms for PBT sit in the mid-range engineering pricing band, sold as PBT pellets in 25 kg bags, FOB Shanghai, normally ready to ship within 5 working days, with a minimum order of 500 kg. Test samples are available against a live enquiry.
Request a quote — 24h replySupply Information
Huizhou Lingli Trading supplies PBT grades in 25kg bags, FOB Shanghai. TDS on request; RoHS / REACH documentation availability is recorded per grade — see above. MOQ 100kg, samples for testing.
Request Quote (24h reply)Why Huizhou Lingli Trading
- Direct sourcing from China tier-1 producers
- Multi-grade inventory in Shanghai bonded warehouse
- FOB Shanghai, CIF main ports worldwide
- Free sample for qualified buyers
- 24h quote, 7-day sample dispatch