Home Products About ContactFAQ [email protected]

Home › PA › PA66 FR

PA66 FR PA66 阻燃 · PA66 Flame Retardant

电气元件、UL94 V-0

About This Grade

PA66 FR (PA66 阻燃, PA66 Flame Retardant) — PA is a family of semi-crystalline engineering thermoplastics offering high strength, toughness, wear resistance, and chemical resistance. PA6 offers better processability; PA66 provides higher heat r

Key Applications

Other PA Grades

Grade中文名English NameNote
PA6 NatPA6 本色PA6 Natural通用注塑件、扎带 |
PA6 GF30PA6 30% 玻纤PA6 30% Glass Fiber汽车结构件、发动机周边 |
PA66 NatPA66 本色PA66 Natural高耐温连接器、机械件 |
PA66 GF30PA66 30% 玻纤PA66 30% Glass Fiber高刚性结构件、齿轮 |

Related Grades

Choosing within the PA range

PA is one of 5 grades we catalogue in this family, and they are not interchangeable. The differences between them are not marketing variations: they are different formulations solving different problems, and picking the wrong one shows up later as a warpage, a creep, or a connector that will not hold its seating.

This page covers PA66 FR (PA66 Flame Retardant). The grades listed below are the other options in the same family, and each one is a deliberate step away from the plain grade.

GradeNameWhere it is used
PA6 NatPA6 Natural通用注塑件、扎带details ›
PA6 GF30PA6 30% Glass Fiber汽车结构件、发动机周边details ›
PA66 NatPA66 Natural高耐温连接器、机械件details ›
PA66 GF30PA66 30% Glass Fiber高刚性结构件、齿轮details ›

Two practical rules when reading that table. First, a reinforced grade is not simply a better grade — glass fibre changes the shrinkage and the flow, so a reinforced grade usually means a different mould, not the same mould with better resin. Second, where a family offers both a flame-retardant and a plain grade, the flame retardant is the one to specify if the part ends up inside a powered enclosure, and the plain grade is the cheaper answer everywhere else. If the application does not decide it for you, tell us the end use and we will work back to the grade.

We would rather quote you the grade that fits than the grade that is easiest for us to ship.

What this grade is for

Every PA grade in our catalogue is filed against the same application set, because the family itself, not the individual variant, determines where it goes. The variant decides how it behaves there — how stiff it is, how it flows, how it handles heat. That is why the note above is the one-line answer and the rest of this page is the reasoning.

The family behind this grade

PA is a family of semi-crystalline engineering thermoplastics offering high strength, toughness, wear resistance, and chemical resistance. PA6 offers better processability; PA66 provides higher heat r

In practice the family shows up in automotive intake manifolds (PA66), industrial tire cord (PA66), textile filament/carpet yarn (PA6) and the wider set of 5 applications the PA plant is qualified for. The material we quote is drawn from Solvay Technyl A 218/A 60G2, DuPont Zytel 101/70G13, BASF Ultramid A3K/A3EG6 and comparable sources — the specific manufacturer is confirmed against your order rather than assumed in advance.

How the same application is solved in other families

The applications below are not exclusive to PA. Where another family solves them too, that is usually the more useful comparison for you, because it tells you what you are trading away when you settle on PA.

ApplicationFamilies covering itOther options
Automotive under-hood1only offered in this family
Electrical connectors1only offered in this family
Power tool housings1only offered in this family
Bearings & gears1only offered in this family

Documentation and supply

Compliance for PA66 FR is recorded as EU 2011/65/EU, EU 1907/2006 — each one attaches to this grade, not to the polymer in general.

Where a standard is still open on our side we say so before you order rather than after. Ask us for the specific document type and grade and we will tell you plainly what we can and cannot supply.

Family reference properties

The figures below are the PA family reference values, not the measured properties of PA66 FR itself. A grade moves away from the family according to its formulation — reinforcement, flame retardant and filler content all change these numbers. This is exactly why each grade sheet carries its own values, and why the grade sheet is what we quote from.

PropertyReference valueTest standard
Density1.14 g/cm³ISO 1183
Tensile Strength80 MPaISO 527
Flexural Modulus2800 MPaISO 178
Heat Deflection Temperature (HDT)180°CISO 75
Continuous Use Temperature150°CUL 746B
Flammability RatingUL94 V-2UL 94

Measured properties for PA66 FR

These are the values recorded against PA66 FR itself, taken from its own technical data sheet and shown with the standard each was measured under. A number without its standard is not comparable between suppliers, which is why the standard sits next to every figure. Where the datasheet gives a range, the range is reproduced as reported rather than collapsed to a single number.

PropertyValueTest standard
Density1.17 g/cm³ISO 2781
Tensile Strength80 MPaISO 527-2
Tensile Modulus3300 MPaISO 527-2
Melting Point260 - 265 °Cas reported

These are grade-specific values rather than family reference figures. Where a property is missing from this table, we do not hold a recorded value for it on this grade — we leave it out rather than fill the gap with a family number.

Supply terms for PA sit in the mid-range engineering pricing band, sold as PA pellets in 25 kg bags, FOB Shanghai, normally ready to ship within 5 working days, with a minimum order of 500 kg. Test samples are available against a live enquiry.

Request a quote — 24h reply

Supply Information

Huizhou Lingli Trading supplies PA grades in 25kg bags, FOB Shanghai. TDS on request; RoHS / REACH documentation availability is recorded per grade — see above. MOQ 100kg, samples for testing.

Request Quote (24h reply)

Why Huizhou Lingli Trading