PA6 Nat PA6 本色 · PA6 Natural
通用注塑件、扎带
About This Grade
PA6 Nat (PA6 本色, PA6 Natural) — PA is a family of semi-crystalline engineering thermoplastics offering high strength, toughness, wear resistance, and chemical resistance. PA6 offers better processability; PA66 provides higher heat r
Key Applications
- Automotive under-hood
- Electrical connectors
- Power tool housings
- Bearings & gears
Other PA Grades
| Grade | 中文名 | English Name | Note |
|---|---|---|---|
| PA6 GF30 | PA6 30% 玻纤 | PA6 30% Glass Fiber | 汽车结构件、发动机周边 | |
| PA66 Nat | PA66 本色 | PA66 Natural | 高耐温连接器、机械件 | |
| PA66 GF30 | PA66 30% 玻纤 | PA66 30% Glass Fiber | 高刚性结构件、齿轮 | |
| PA66 FR | PA66 阻燃 | PA66 Flame Retardant | 电气元件、UL94 V-0 | |
Related Grades
Choosing within the PA range
PA is one of 5 grades we catalogue in this family, and they are not interchangeable. The differences between them are not marketing variations: they are different formulations solving different problems, and picking the wrong one shows up later as a warpage, a creep, or a connector that will not hold its seating.
This page covers PA6 Nat (PA6 Natural). The grades listed below are the other options in the same family, and each one is a deliberate step away from the plain grade.
| Grade | Name | Where it is used | |
|---|---|---|---|
| PA6 GF30 | PA6 30% Glass Fiber | 汽车结构件、发动机周边 | details › |
| PA66 Nat | PA66 Natural | 高耐温连接器、机械件 | details › |
| PA66 GF30 | PA66 30% Glass Fiber | 高刚性结构件、齿轮 | details › |
| PA66 FR | PA66 Flame Retardant | 电气元件、UL94 V-0 | details › |
Two practical rules when reading that table. First, a reinforced grade is not simply a better grade — glass fibre changes the shrinkage and the flow, so a reinforced grade usually means a different mould, not the same mould with better resin. Second, where a family offers both a flame-retardant and a plain grade, the flame retardant is the one to specify if the part ends up inside a powered enclosure, and the plain grade is the cheaper answer everywhere else. If the application does not decide it for you, tell us the end use and we will work back to the grade.
We would rather quote you the grade that fits than the grade that is easiest for us to ship.
What this grade is for
- Automotive under-hood — the application this grade is catalogued for. If your part does something else, say so and we will check the fit rather than assume it.
- Electrical connectors — the application this grade is catalogued for. If your part does something else, say so and we will check the fit rather than assume it.
- Power tool housings — the application this grade is catalogued for. If your part does something else, say so and we will check the fit rather than assume it.
- Bearings & gears — the application this grade is catalogued for. If your part does something else, say so and we will check the fit rather than assume it.
Every PA grade in our catalogue is filed against the same application set, because the family itself, not the individual variant, determines where it goes. The variant decides how it behaves there — how stiff it is, how it flows, how it handles heat. That is why the note above is the one-line answer and the rest of this page is the reasoning.
The family behind this grade
PA is a family of semi-crystalline engineering thermoplastics offering high strength, toughness, wear resistance, and chemical resistance. PA6 offers better processability; PA66 provides higher heat r
In practice the family shows up in automotive intake manifolds (PA66), industrial tire cord (PA66), textile filament/carpet yarn (PA6) and the wider set of 5 applications the PA plant is qualified for. The material we quote is drawn from Solvay Technyl A 218/A 60G2, DuPont Zytel 101/70G13, BASF Ultramid A3K/A3EG6 and comparable sources — the specific manufacturer is confirmed against your order rather than assumed in advance.
How the same application is solved in other families
The applications below are not exclusive to PA. Where another family solves them too, that is usually the more useful comparison for you, because it tells you what you are trading away when you settle on PA.
| Application | Families covering it | Other options |
|---|---|---|
| Automotive under-hood | 1 | only offered in this family |
| Electrical connectors | 1 | only offered in this family |
| Power tool housings | 1 | only offered in this family |
| Bearings & gears | 1 | only offered in this family |
Documentation and supply
Compliance for PA6 Nat is recorded as EU 2011/65/EU, EU 1907/2006 — each one attaches to this grade, not to the polymer in general.
Where a standard is still open on our side we say so before you order rather than after. Ask us for the specific document type and grade and we will tell you plainly what we can and cannot supply.
Family reference properties
The figures below are the PA family reference values, not the measured properties of PA6 Nat itself. A grade moves away from the family according to its formulation — reinforcement, flame retardant and filler content all change these numbers. This is exactly why each grade sheet carries its own values, and why the grade sheet is what we quote from.
| Property | Reference value | Test standard |
|---|---|---|
| Density | 1.14 g/cm³ | ISO 1183 |
| Tensile Strength | 80 MPa | ISO 527 |
| Flexural Modulus | 2800 MPa | ISO 178 |
| Heat Deflection Temperature (HDT) | 180°C | ISO 75 |
| Continuous Use Temperature | 150°C | UL 746B |
| Flammability Rating | UL94 V-2 | UL 94 |
Measured properties for PA6 Nat
These are the values recorded against PA6 Nat itself, taken from its own technical data sheet and shown with the standard each was measured under. A number without its standard is not comparable between suppliers, which is why the standard sits next to every figure. Where the datasheet gives a range, the range is reproduced as reported rather than collapsed to a single number.
| Property | Value | Test standard |
|---|---|---|
| Density | 1.14 g/cm³ | ASTM D1505 |
| Water Absorption | 3 % | ISO 62 |
These are grade-specific values rather than family reference figures. Where a property is missing from this table, we do not hold a recorded value for it on this grade — we leave it out rather than fill the gap with a family number.
Supply terms for PA sit in the mid-range engineering pricing band, sold as PA pellets in 25 kg bags, FOB Shanghai, normally ready to ship within 5 working days, with a minimum order of 500 kg. Test samples are available against a live enquiry.
Request a quote — 24h replySupply Information
Huizhou Lingli Trading supplies PA grades in 25kg bags, FOB Shanghai. TDS on request; RoHS / REACH documentation availability is recorded per grade — see above. MOQ 100kg, samples for testing.
Request Quote (24h reply)Why Huizhou Lingli Trading
- Direct sourcing from China tier-1 producers
- Multi-grade inventory in Shanghai bonded warehouse
- FOB Shanghai, CIF main ports worldwide
- Free sample for qualified buyers
- 24h quote, 7-day sample dispatch