Home Products About ContactFAQ [email protected]

Home › EVA › EVA HM

EVA HM EVA 热熔胶 (18-25%) · EVA Hot Melt

书刊装订、热熔胶棒

About This Grade

EVA HM (EVA 热熔胶 (18-25%), EVA Hot Melt) — EVA is a versatile copolymer whose properties depend on vinyl acetate (VA) content — 14-18% VA for films, 18-25% for hot melt adhesives, 26-28% for shoe foams, 28-33% for photovoltaic encapsulation fi

Key Applications

Other EVA Grades

Grade中文名English NameNote
EVA FilmEVA 薄膜级 (14-18% VA)EVA Film Grade包装膜、农膜 |
EVA FoamEVA 发泡 (26-28%)EVA Foam鞋材中底、运动器材 |
EVA PVEVA 光伏 (28-33%)EVA Photovoltaic光伏组件胶膜、双玻组件 |
EVA HVEVA 高 VA (33-40%)EVA High VA高端热熔胶、特种应用 |

Related Grades

Choosing within the EVA range

EVA is one of 5 grades we catalogue in this family, and they are not interchangeable. The differences between them are not marketing variations: they are different formulations solving different problems, and picking the wrong one shows up later as a warpage, a creep, or a connector that will not hold its seating.

This page covers EVA HM (EVA Hot Melt). The grades listed below are the other options in the same family, and each one is a deliberate step away from the plain grade.

GradeNameWhere it is used
EVA FilmEVA Film Grade包装膜、农膜details ›
EVA FoamEVA Foam鞋材中底、运动器材details ›
EVA PVEVA Photovoltaic光伏组件胶膜、双玻组件details ›
EVA HVEVA High VA高端热熔胶、特种应用details ›

Two practical rules when reading that table. First, a reinforced grade is not simply a better grade — glass fibre changes the shrinkage and the flow, so a reinforced grade usually means a different mould, not the same mould with better resin. Second, where a family offers both a flame-retardant and a plain grade, the flame retardant is the one to specify if the part ends up inside a powered enclosure, and the plain grade is the cheaper answer everywhere else. If the application does not decide it for you, tell us the end use and we will work back to the grade.

We would rather quote you the grade that fits than the grade that is easiest for us to ship.

What this grade is for

Every EVA grade in our catalogue is filed against the same application set, because the family itself, not the individual variant, determines where it goes. The variant decides how it behaves there — how stiff it is, how it flows, how it handles heat. That is why the note above is the one-line answer and the rest of this page is the reasoning.

The family behind this grade

EVA is a versatile copolymer whose properties depend on vinyl acetate (VA) content — 14-18% VA for films, 18-25% for hot melt adhesives, 26-28% for shoe foams, 28-33% for photovoltaic encapsulation fi

In practice the family shows up in solar PV module encapsulant film (EVA 28-33% VA), foam midsoles for sports shoes (EVA 12-18% VA), hot-melt adhesive formulations and the wider set of 5 applications the EVA plant is qualified for. The material we quote is drawn from Hanwha Solutions (Korea) EVA 2825/3320, Sumitomo EVA LE-1010, LyondellBasell Lupolen V and comparable sources — the specific manufacturer is confirmed against your order rather than assumed in advance.

How the same application is solved in other families

The applications below are not exclusive to EVA. Where another family solves them too, that is usually the more useful comparison for you, because it tells you what you are trading away when you settle on EVA.

ApplicationFamilies covering itOther options
Photovoltaic encapsulation film1only offered in this family
Hot melt adhesives1only offered in this family
Foam & shoe midsoles1only offered in this family
Agricultural film2PBAT

Documentation and supply

Compliance for EVA HM is recorded as EU 2011/65/EU, EU 1907/2006 — each one attaches to this grade, not to the polymer in general.

Where a standard is still open on our side we say so before you order rather than after. Ask us for the specific document type and grade and we will tell you plainly what we can and cannot supply.

Family reference properties

The figures below are the EVA family reference values, not the measured properties of EVA HM itself. A grade moves away from the family according to its formulation — reinforcement, flame retardant and filler content all change these numbers. This is exactly why each grade sheet carries its own values, and why the grade sheet is what we quote from.

PropertyReference valueTest standard
Density0.94 g/cm³ISO 1183
Tensile Strength20 MPaISO 527
Flexural Modulus100 MPaISO 178
Heat Deflection Temperature (HDT)60°CISO 75
Continuous Use Temperature60°CUL 746B
Flammability RatingUL94 HBUL 94

Measured properties for EVA HM

These are the values recorded against EVA HM itself, taken from its own technical data sheet and shown with the standard each was measured under. A number without its standard is not comparable between suppliers, which is why the standard sits next to every figure. Where the datasheet gives a range, the range is reproduced as reported rather than collapsed to a single number.

PropertyValueTest standard
Density0.952 g/cm³ASTM D1505
Melt Flow Rate43 g/10 minASTM D1238

These are grade-specific values rather than family reference figures. Where a property is missing from this table, we do not hold a recorded value for it on this grade — we leave it out rather than fill the gap with a family number.

Supply terms for EVA sit in the commodity pricing band, sold as EVA pellets in 25 kg bags, FOB Shanghai, normally ready to ship within 7 working days, with a minimum order of 500 kg. Test samples are available against a live enquiry.

Request a quote — 24h reply

Supply Information

Huizhou Lingli Trading supplies EVA grades in 25kg bags, FOB Shanghai. TDS on request; RoHS / REACH documentation availability is recorded per grade — see above. MOQ 100kg, samples for testing.

Request Quote (24h reply)

Why Huizhou Lingli Trading