EVA Foam EVA 发泡 (26-28%) · EVA Foam
鞋材中底、运动器材
About This Grade
EVA Foam (EVA 发泡 (26-28%), EVA Foam) — EVA is a versatile copolymer whose properties depend on vinyl acetate (VA) content — 14-18% VA for films, 18-25% for hot melt adhesives, 26-28% for shoe foams, 28-33% for photovoltaic encapsulation fi
Key Applications
- Photovoltaic encapsulation film
- Hot melt adhesives
- Foam & shoe midsoles
- Agricultural film
Other EVA Grades
| Grade | 中文名 | English Name | Note |
|---|---|---|---|
| EVA Film | EVA 薄膜级 (14-18% VA) | EVA Film Grade | 包装膜、农膜 | |
| EVA HM | EVA 热熔胶 (18-25%) | EVA Hot Melt | 书刊装订、热熔胶棒 | |
| EVA PV | EVA 光伏 (28-33%) | EVA Photovoltaic | 光伏组件胶膜、双玻组件 | |
| EVA HV | EVA 高 VA (33-40%) | EVA High VA | 高端热熔胶、特种应用 | |
Related Grades
Choosing within the EVA range
EVA is one of 5 grades we catalogue in this family, and they are not interchangeable. The differences between them are not marketing variations: they are different formulations solving different problems, and picking the wrong one shows up later as a warpage, a creep, or a connector that will not hold its seating.
This page covers EVA Foam (EVA Foam). The grades listed below are the other options in the same family, and each one is a deliberate step away from the plain grade.
| Grade | Name | Where it is used | |
|---|---|---|---|
| EVA Film | EVA Film Grade | 包装膜、农膜 | details › |
| EVA HM | EVA Hot Melt | 书刊装订、热熔胶棒 | details › |
| EVA PV | EVA Photovoltaic | 光伏组件胶膜、双玻组件 | details › |
| EVA HV | EVA High VA | 高端热熔胶、特种应用 | details › |
Two practical rules when reading that table. First, a reinforced grade is not simply a better grade — glass fibre changes the shrinkage and the flow, so a reinforced grade usually means a different mould, not the same mould with better resin. Second, where a family offers both a flame-retardant and a plain grade, the flame retardant is the one to specify if the part ends up inside a powered enclosure, and the plain grade is the cheaper answer everywhere else. If the application does not decide it for you, tell us the end use and we will work back to the grade.
We would rather quote you the grade that fits than the grade that is easiest for us to ship.
What this grade is for
- Photovoltaic encapsulation film — the application this grade is catalogued for. If your part does something else, say so and we will check the fit rather than assume it.
- Hot melt adhesives — the application this grade is catalogued for. If your part does something else, say so and we will check the fit rather than assume it.
- Foam & shoe midsoles — the application this grade is catalogued for. If your part does something else, say so and we will check the fit rather than assume it.
- Agricultural film — the application this grade is catalogued for. If your part does something else, say so and we will check the fit rather than assume it.
Every EVA grade in our catalogue is filed against the same application set, because the family itself, not the individual variant, determines where it goes. The variant decides how it behaves there — how stiff it is, how it flows, how it handles heat. That is why the note above is the one-line answer and the rest of this page is the reasoning.
The family behind this grade
EVA is a versatile copolymer whose properties depend on vinyl acetate (VA) content — 14-18% VA for films, 18-25% for hot melt adhesives, 26-28% for shoe foams, 28-33% for photovoltaic encapsulation fi
In practice the family shows up in solar PV module encapsulant film (EVA 28-33% VA), foam midsoles for sports shoes (EVA 12-18% VA), hot-melt adhesive formulations and the wider set of 5 applications the EVA plant is qualified for. The material we quote is drawn from Hanwha Solutions (Korea) EVA 2825/3320, Sumitomo EVA LE-1010, LyondellBasell Lupolen V and comparable sources — the specific manufacturer is confirmed against your order rather than assumed in advance.
How the same application is solved in other families
The applications below are not exclusive to EVA. Where another family solves them too, that is usually the more useful comparison for you, because it tells you what you are trading away when you settle on EVA.
| Application | Families covering it | Other options |
|---|---|---|
| Photovoltaic encapsulation film | 1 | only offered in this family |
| Hot melt adhesives | 1 | only offered in this family |
| Foam & shoe midsoles | 1 | only offered in this family |
| Agricultural film | 2 | PBAT |
Documentation and supply
Compliance for EVA Foam is recorded as EU 2011/65/EU, EU 1907/2006 — each one attaches to this grade, not to the polymer in general.
Where a standard is still open on our side we say so before you order rather than after. Ask us for the specific document type and grade and we will tell you plainly what we can and cannot supply.
Family reference properties
The figures below are the EVA family reference values, not the measured properties of EVA Foam itself. A grade moves away from the family according to its formulation — reinforcement, flame retardant and filler content all change these numbers. This is exactly why each grade sheet carries its own values, and why the grade sheet is what we quote from.
| Property | Reference value | Test standard |
|---|---|---|
| Density | 0.94 g/cm³ | ISO 1183 |
| Tensile Strength | 20 MPa | ISO 527 |
| Flexural Modulus | 100 MPa | ISO 178 |
| Heat Deflection Temperature (HDT) | 60°C | ISO 75 |
| Continuous Use Temperature | 60°C | UL 746B |
| Flammability Rating | UL94 HB | UL 94 |
Measured properties for EVA Foam
These are the values recorded against EVA Foam itself, taken from its own technical data sheet and shown with the standard each was measured under. A number without its standard is not comparable between suppliers, which is why the standard sits next to every figure. Where the datasheet gives a range, the range is reproduced as reported rather than collapsed to a single number.
| Property | Value | Test standard |
|---|---|---|
| Density | 0.938 g/cm³ | ASTM D1505 |
| Melt Flow Rate | 3 g/10 min | ASTM D1238 |
These are grade-specific values rather than family reference figures. Where a property is missing from this table, we do not hold a recorded value for it on this grade — we leave it out rather than fill the gap with a family number.
Supply terms for EVA sit in the commodity pricing band, sold as EVA pellets in 25 kg bags, FOB Shanghai, normally ready to ship within 7 working days, with a minimum order of 500 kg. Test samples are available against a live enquiry.
Request a quote — 24h replySupply Information
Huizhou Lingli Trading supplies EVA grades in 25kg bags, FOB Shanghai. TDS on request; RoHS / REACH documentation availability is recorded per grade — see above. MOQ 100kg, samples for testing.
Request Quote (24h reply)Why Huizhou Lingli Trading
- Direct sourcing from China tier-1 producers
- Multi-grade inventory in Shanghai bonded warehouse
- FOB Shanghai, CIF main ports worldwide
- Free sample for qualified buyers
- 24h quote, 7-day sample dispatch