Home Products About ContactFAQ [email protected]

Home › POM › POM GF25

POM GF25 25% 玻纤 POM · POM 25% Glass Fiber

高刚性结构件、线圈骨架

About This Grade

POM GF25 (25% 玻纤 POM, POM 25% Glass Fiber) — POM (Acetal) is a high-performance engineering thermoplastic known as 赛钢 in Chinese industry. POM offers exceptional dimensional stability, low friction, high fatigue endurance, and excellent machinab

Key Applications

Other POM Grades

Grade中文名English NameNote
POM Homo均聚 POMPOM Homopolymer高强度齿轮、精密机械件 |
POM Copo共聚 POMPOM Copolymer耐热水件、食品级应用 |
POM Lub含润滑剂 POMPOM PTFE Lubricated低摩擦齿轮、滑动轴承 |

Related Grades

Choosing within the POM range

POM is one of 4 grades we catalogue in this family, and they are not interchangeable. The differences between them are not marketing variations: they are different formulations solving different problems, and picking the wrong one shows up later as a warpage, a creep, or a connector that will not hold its seating.

This page covers POM GF25 (POM 25% Glass Fiber). The grades listed below are the other options in the same family, and each one is a deliberate step away from the plain grade.

GradeNameWhere it is used
POM HomoPOM Homopolymer高强度齿轮、精密机械件details ›
POM CopoPOM Copolymer耐热水件、食品级应用details ›
POM LubPOM PTFE Lubricated低摩擦齿轮、滑动轴承details ›

Two practical rules when reading that table. First, a reinforced grade is not simply a better grade — glass fibre changes the shrinkage and the flow, so a reinforced grade usually means a different mould, not the same mould with better resin. Second, where a family offers both a flame-retardant and a plain grade, the flame retardant is the one to specify if the part ends up inside a powered enclosure, and the plain grade is the cheaper answer everywhere else. If the application does not decide it for you, tell us the end use and we will work back to the grade.

We would rather quote you the grade that fits than the grade that is easiest for us to ship.

What this grade is for

Every POM grade in our catalogue is filed against the same application set, because the family itself, not the individual variant, determines where it goes. The variant decides how it behaves there — how stiff it is, how it flows, how it handles heat. That is why the note above is the one-line answer and the rest of this page is the reasoning.

The family behind this grade

POM (Acetal) is a high-performance engineering thermoplastic known as 赛钢 in Chinese industry. POM offers exceptional dimensional stability, low friction, high fatigue endurance, and excellent machinab

In practice the family shows up in precision gears/bearings (consumer/auto), zipper/fastener components, fuel system parts (POM-C) and the wider set of 5 applications the POM plant is qualified for. The material we quote is drawn from DuPont Delrin 100/500/100P, Celanese/Ticona Hostaform C/T, Mitsubishi Iupital F20/F30 and comparable sources — the specific manufacturer is confirmed against your order rather than assumed in advance.

How the same application is solved in other families

The applications below are not exclusive to POM. Where another family solves them too, that is usually the more useful comparison for you, because it tells you what you are trading away when you settle on POM.

ApplicationFamilies covering itOther options
Precision gears1only offered in this family
Bearings & bushings1only offered in this family
Fasteners & clips1only offered in this family
Pump components1only offered in this family

Documentation and supply

Compliance for POM GF25 is recorded as EU 2011/65/EU, EU 1907/2006 — each one attaches to this grade, not to the polymer in general.

Where a standard is still open on our side we say so before you order rather than after. Ask us for the specific document type and grade and we will tell you plainly what we can and cannot supply.

Family reference properties

The figures below are the POM family reference values, not the measured properties of POM GF25 itself. A grade moves away from the family according to its formulation — reinforcement, flame retardant and filler content all change these numbers. This is exactly why each grade sheet carries its own values, and why the grade sheet is what we quote from.

PropertyReference valueTest standard
Density1.42 g/cm³ISO 1183
Tensile Strength70 MPaISO 527
Flexural Modulus2800 MPaISO 178
Heat Deflection Temperature (HDT)160°CISO 75
Continuous Use Temperature100°CUL 746B
Flammability RatingUL94 HBUL 94

Measured properties for POM GF25

These are the values recorded against POM GF25 itself, taken from its own technical data sheet and shown with the standard each was measured under. A number without its standard is not comparable between suppliers, which is why the standard sits next to every figure. Where the datasheet gives a range, the range is reproduced as reported rather than collapsed to a single number.

PropertyValueTest standard
Density1.59 g/cm³as reported
Tensile Strength120 MPaISO 527-1
Tensile Modulus9300 MPaISO 527-1
Elongation at Break2 %ISO 527-1
Vicat Softening Point160 °CISO 306
Heat Deflection Temperature (HDT)160 °Cas reported
Melt Flow Rate4.5 g/10 minISO 1133
Water Absorption0.17 %as reported

These are grade-specific values rather than family reference figures. Where a property is missing from this table, we do not hold a recorded value for it on this grade — we leave it out rather than fill the gap with a family number.

Supply terms for POM sit in the mid-range engineering pricing band, sold as POM pellets in 25 kg bags, FOB Shanghai, normally ready to ship within 5 working days, with a minimum order of 500 kg. Test samples are available against a live enquiry.

Request a quote — 24h reply

Supply Information

Huizhou Lingli Trading supplies POM grades in 25kg bags, FOB Shanghai. TDS on request; RoHS / REACH documentation availability is recorded per grade — see above. MOQ 100kg, samples for testing.

Request Quote (24h reply)

Why Huizhou Lingli Trading