Ingeo 6100D Ingeo 6100D 熔融纺丝级 · Ingeo 6100D PLA Fiber Melt Spinning
熔融纺丝级 | NatureWorks
About This Grade
Ingeo 6100D (Ingeo 6100D 熔融纺丝级, Ingeo 6100D PLA Fiber Melt Spinning) — Ingeo™ Biopolymer 6100D Technical Data Sheet Fiber Melt Spinning PLA is a bio-based, industrially compostable thermoplastic derived from renewable resources such as corn starch or sugarcane. Good rigidity, transparency, and processability. The most widely used bioplastic globally.
Key Applications
- Staple fiber
- Nonwovens
- Agricultural woven and nonwoven fabrics
- Articles for household disposal
- Textiles
- Continuous filament – Textured and flat yarns
- Spunbond fabrics
Other PLA Grades
| Grade | 中文名 | English Name | Note |
|---|---|---|---|
| PLA Film | PLA 薄膜级 | PLA Film Grade | 可降解包装膜、农膜 | |
| PLA Inj | PLA 注塑级 | PLA Injection Grade | 可降解餐具、3D 打印 | |
| PLA Fiber | PLA 纤维级 | PLA Fiber Grade | 无纺布、纺织纤维 | |
| PLA HH | 耐热 PLA | PLA High Heat | 热饮杯盖、耐热餐具 | |
| Ingeo 3001D | Ingeo 3001D 注塑级 | Ingeo 3001D PLA Injection Molding | 注塑级 | NatureWorks | |
| Ingeo 3052D | Ingeo 3052D 注塑级 | Ingeo 3052D PLA Injection Molding | 注塑级 | NatureWorks | |
| Ingeo 4032D | Ingeo 4032D 高耐热挤出级 | Ingeo 4032D PLA Extrusion Grade for Higher Heat Products | 高耐热挤出级 | NatureWorks | |
| Ingeo 4043D | Ingeo 4043D 双向拉伸膜级 | Ingeo 4043D PLA Biaxially Oriented Films - General Purpose | 双向拉伸膜级 | NatureWorks | |
| Ingeo 4060D | Ingeo 4060D 共挤热封层级 | Ingeo 4060D PLA Heat Seal Layer in Coextruded Oriented Film | 共挤热封层级 | NatureWorks | |
| Ingeo 6201D | Ingeo 6201D 熔融纺丝级 | Ingeo 6201D PLA Fiber Melt Spinning | 熔融纺丝级 | NatureWorks | |
| Ingeo 6202D | Ingeo 6202D 熔融纺丝级 | Ingeo 6202D PLA Fiber Melt Spinning | 熔融纺丝级 | NatureWorks | |
| Ingeo 6252D | Ingeo 6252D 熔喷级 | Ingeo 6252D PLA Meltblown | 熔喷级 | NatureWorks | |
| Ingeo 6260D | Ingeo 6260D 熔喷与熔融纺丝级 | Ingeo 6260D PLA Melt Blown Fiber and Fiber Melt Spinning | 熔喷与熔融纺丝级 | NatureWorks | |
| Ingeo 6302D | Ingeo 6302D 熔融纺丝级 | Ingeo 6302D PLA Fiber Melt Spinning | 熔融纺丝级 | NatureWorks | |
| Ingeo 6362D | Ingeo 6362D 特种纤维级 | Ingeo 6362D PLA Specialized Fibers | 特种纤维级 | NatureWorks | |
| Ingeo 6752D | Ingeo 6752D 熔融纺丝级 | Ingeo 6752D PLA Fiber Melt Spinning | 熔融纺丝级 | NatureWorks | |
| Ingeo 7032D | Ingeo 7032D 注拉吹瓶级 | Ingeo 7032D PLA Injection Stretch Blow Molded Bottles | 注拉吹瓶级 | NatureWorks | |
| Ingeo 2500HP | Ingeo 2500HP 挤出级(高黏度) | Ingeo 2500HP PLA Extrusion Applications | 挤出级(高黏度) | NatureWorks | |
| Ingeo 3100HP | Ingeo 3100HP 注塑级(中黏度) | Ingeo 3100HP PLA Injection Molding | 注塑级(中黏度) | NatureWorks | |
| Ingeo 3260HP | Ingeo 3260HP 注塑级(低黏度) | Ingeo 3260HP PLA Injection Molding | 注塑级(低黏度) | NatureWorks | |
| Latigea B01 I6 | Latigea B01 I6 无填料高延伸级 | Latigea B01 I6 PLA Unfilled, Good Elongation | 无填料高延伸级 | LATI | |
| Latigea B02 H6 | Latigea B02 H6 无填料高耐热级 | Latigea B02 H6 PLA Unfilled, Improved Thermal Stability | 无填料高耐热级 | LATI | |
| Latigray 37 B01-01 CX/35 | Latigray 37 B01-01 CX/35 不透射线专用矿物填料级 | Latigray 37 B01-01 CX/35 PLA Radiopaque Compound, Special Mineral Filler | 不透射线专用矿物填料级 | LATI | |
| Latilub 37 B01-02S | Latilub 37 B01-02S 硅基自润滑级 | Latilub 37 B01-02S PLA Self-lubricating, Silicone | 硅基自润滑级 | LATI | |
| Latimass 37 B01-01 D025 | Latimass 37 B01-01 D025 特定密度专用填料级 | Latimass 37 B01-01 D025 PLA Specific Density Compound, Special Filler | 特定密度专用填料级 | LATI | |
| CP-L01 | CP-L01 片材增韧母粒 | CP-L01 PLA PLA Sheet Impact and Processing Masterbatch | 片材增韧母粒 | Polyvel | |
| EcoVid 30GBTFH | EcoVid 30GBTFH 高耐热热成型共混级 | EcoVid 30GBTFH PLA Thermoforming Blend, High Heat Resistance | 高耐热热成型共混级 | Greener Polymers | |
| EcoVid 43IMH | EcoVid 43IMH 高耐热热成型共混级 | EcoVid 43IMH PLA Thermoforming Blend, High Heat Resistance | 高耐热热成型共混级 | Greener Polymers | |
| EcoVid 43TFH | EcoVid 43TFH 高耐热热成型共混级 | EcoVid 43TFH PLA Thermoforming Blend, High Heat Resistance | 高耐热热成型共混级 | Greener Polymers | |
| EcoVid 80TFH | EcoVid 80TFH 薄壁高耐热热成型共混级 | EcoVid 80TFH PLA Thermoforming Blend for Thin Walled, High Heat Resistance | 薄壁高耐热热成型共混级 | Greener Polymers | |
| KYL-2040 | KYL-2040 挤出级 | KYL-2040 PLA Extrusion Grade | 挤出级 | Jiangxi Academy of Sciences | |
| Luminy LX175 | Luminy LX175 挤出级 | Luminy LX175 PLA Extrusion Grade | 挤出级 | TotalEnergies | |
| FY801 | FY801 挤出级 | FY801 PLA Extrusion Grade | 挤出级 | Anhui BBCA | |
Choosing within the PLA range
PLA is one of 34 grades we catalogue in this family, and they are not interchangeable. The differences between them are not marketing variations: they are different formulations solving different problems, and picking the wrong one shows up later as a warpage, a creep, or a connector that will not hold its seating.
This page covers Ingeo 6100D (Ingeo 6100D PLA Fiber Melt Spinning). The grades listed below are the other options in the same family, and each one is a deliberate step away from the plain grade.
| Grade | Name | Where it is used | |
|---|---|---|---|
| PLA Film | PLA Film Grade | 可降解包装膜、农膜 | details › |
| PLA Inj | PLA Injection Grade | 可降解餐具、3D 打印 | details › |
| PLA Fiber | PLA Fiber Grade | 无纺布、纺织纤维 | details › |
| PLA HH | PLA High Heat | 热饮杯盖、耐热餐具 | details › |
| Ingeo 3001D | Ingeo 3001D PLA Injection Molding | 注塑级 | NatureWorks | details › |
| Ingeo 3052D | Ingeo 3052D PLA Injection Molding | 注塑级 | NatureWorks | details › |
| Ingeo 4032D | Ingeo 4032D PLA Extrusion Grade for Higher Heat Products | 高耐热挤出级 | NatureWorks | details › |
| Ingeo 4043D | Ingeo 4043D PLA Biaxially Oriented Films - General Purpose | 双向拉伸膜级 | NatureWorks | details › |
| Ingeo 4060D | Ingeo 4060D PLA Heat Seal Layer in Coextruded Oriented Film | 共挤热封层级 | NatureWorks | details › |
| Ingeo 6201D | Ingeo 6201D PLA Fiber Melt Spinning | 熔融纺丝级 | NatureWorks | details › |
| Ingeo 6202D | Ingeo 6202D PLA Fiber Melt Spinning | 熔融纺丝级 | NatureWorks | details › |
| Ingeo 6252D | Ingeo 6252D PLA Meltblown | 熔喷级 | NatureWorks | details › |
| Ingeo 6260D | Ingeo 6260D PLA Melt Blown Fiber and Fiber Melt Spinning | 熔喷与熔融纺丝级 | NatureWorks | details › |
| Ingeo 6302D | Ingeo 6302D PLA Fiber Melt Spinning | 熔融纺丝级 | NatureWorks | details › |
| Ingeo 6362D | Ingeo 6362D PLA Specialized Fibers | 特种纤维级 | NatureWorks | details › |
| Ingeo 6752D | Ingeo 6752D PLA Fiber Melt Spinning | 熔融纺丝级 | NatureWorks | details › |
| Ingeo 7032D | Ingeo 7032D PLA Injection Stretch Blow Molded Bottles | 注拉吹瓶级 | NatureWorks | details › |
| Ingeo 2500HP | Ingeo 2500HP PLA Extrusion Applications | 挤出级(高黏度) | NatureWorks | details › |
| Ingeo 3100HP | Ingeo 3100HP PLA Injection Molding | 注塑级(中黏度) | NatureWorks | details › |
| Ingeo 3260HP | Ingeo 3260HP PLA Injection Molding | 注塑级(低黏度) | NatureWorks | details › |
| Latigea B01 I6 | Latigea B01 I6 PLA Unfilled, Good Elongation | 无填料高延伸级 | LATI | details › |
| Latigea B02 H6 | Latigea B02 H6 PLA Unfilled, Improved Thermal Stability | 无填料高耐热级 | LATI | details › |
| Latigray 37 B01-01 CX/35 | Latigray 37 B01-01 CX/35 PLA Radiopaque Compound, Special Mineral Filler | 不透射线专用矿物填料级 | LATI | details › |
| Latilub 37 B01-02S | Latilub 37 B01-02S PLA Self-lubricating, Silicone | 硅基自润滑级 | LATI | details › |
| Latimass 37 B01-01 D025 | Latimass 37 B01-01 D025 PLA Specific Density Compound, Special Filler | 特定密度专用填料级 | LATI | details › |
| CP-L01 | CP-L01 PLA PLA Sheet Impact and Processing Masterbatch | 片材增韧母粒 | Polyvel | details › |
| EcoVid 30GBTFH | EcoVid 30GBTFH PLA Thermoforming Blend, High Heat Resistance | 高耐热热成型共混级 | Greener Polymers | details › |
| EcoVid 43IMH | EcoVid 43IMH PLA Thermoforming Blend, High Heat Resistance | 高耐热热成型共混级 | Greener Polymers | details › |
| EcoVid 43TFH | EcoVid 43TFH PLA Thermoforming Blend, High Heat Resistance | 高耐热热成型共混级 | Greener Polymers | details › |
| EcoVid 80TFH | EcoVid 80TFH PLA Thermoforming Blend for Thin Walled, High Heat Resistance | 薄壁高耐热热成型共混级 | Greener Polymers | details › |
| KYL-2040 | KYL-2040 PLA Extrusion Grade | 挤出级 | Jiangxi Academy of Sciences | details › |
| Luminy LX175 | Luminy LX175 PLA Extrusion Grade | 挤出级 | TotalEnergies | details › |
| FY801 | FY801 PLA Extrusion Grade | 挤出级 | Anhui BBCA | details › |
Two practical rules when reading that table. First, a reinforced grade is not simply a better grade — glass fibre changes the shrinkage and the flow, so a reinforced grade usually means a different mould, not the same mould with better resin. Second, where a family offers both a flame-retardant and a plain grade, the flame retardant is the one to specify if the part ends up inside a powered enclosure, and the plain grade is the cheaper answer everywhere else. If the application does not decide it for you, tell us the end use and we will work back to the grade.
We would rather quote you the grade that fits than the grade that is easiest for us to ship.
What this grade is for
- Staple fiber — this application is listed under Applications in this grade's own technical data sheet. If your part does something else, say so and we will check the fit rather than assume it.
- Nonwovens — this application is listed under Applications in this grade's own technical data sheet. If your part does something else, say so and we will check the fit rather than assume it.
- Agricultural woven and nonwoven fabrics — this application is listed under Applications in this grade's own technical data sheet. If your part does something else, say so and we will check the fit rather than assume it.
- Articles for household disposal — this application is listed under Applications in this grade's own technical data sheet. If your part does something else, say so and we will check the fit rather than assume it.
- Textiles — this application is listed under Applications in this grade's own technical data sheet. If your part does something else, say so and we will check the fit rather than assume it.
- Continuous filament – Textured and flat yarns — this application is listed under Applications in this grade's own technical data sheet. If your part does something else, say so and we will check the fit rather than assume it.
- Spunbond fabrics — this application is listed under Applications in this grade's own technical data sheet. If your part does something else, say so and we will check the fit rather than assume it.
These applications are read from Ingeo 6100D's own technical data sheet, and that distinction is not cosmetic. Grades inside one family are not interchangeable, and an extrusion grade and a fibre grade of the same polymer end up in entirely different places. The grade decides where the material goes; the formulation decides how it behaves once it is there.
The family behind this grade
Ingeo™ Biopolymer 6100D Technical Data Sheet Fiber Melt Spinning PLA is a bio-based, industrially compostable thermoplastic derived from renewable resources such as corn starch or sugarcane. Good rigidity, transparency, and processability. The most widely used bioplastic globally.
In practice the family shows up in 3D printing filament (FDM/SLA), compostable food serviceware/cutlery, single-use medical implants/sutures (PLLA) and the wider set of 5 applications the PLA plant is qualified for. The material we quote is drawn from NatureWorks (US) Ingeo 3051D/4032D/7001D, TotalEnergies Corbion Luminy LX175, Hisun PLA and comparable sources — the specific manufacturer is confirmed against your order rather than assumed in advance.
How the same application is solved in other families
The applications below are not exclusive to PLA. Where another family solves them too, that is usually the more useful comparison for you, because it tells you what you are trading away when you settle on PLA.
| Application | Families covering it | Other options |
|---|---|---|
| Staple fiber | 1 | only offered in this family |
| Nonwovens | 1 | only offered in this family |
| Agricultural woven and nonwoven fabrics | 1 | only offered in this family |
| Articles for household disposal | 1 | only offered in this family |
| Textiles | 1 | only offered in this family |
| Continuous filament – Textured and flat yarns | 1 | only offered in this family |
| Spunbond fabrics | 1 | only offered in this family |
Documentation and supply
Compliance for Ingeo 6100D is recorded as not yet recorded at grade level.
To be precise about what that means: we hold this grade's manufacturer technical data sheet, but no separate RoHS or REACH certificate in our own records for it. We would rather write that on the page than let you infer coverage from the fact that neighbouring grades carry it. If your project needs a specific declaration, ask us for this grade and we will confirm in writing what we can and cannot support.
Where a standard is still open on our side we say so before you order rather than after. Ask us for the specific document type and grade and we will tell you plainly what we can and cannot supply.
Family reference properties
The figures below are the PLA family reference values, not the measured properties of Ingeo 6100D itself. A grade moves away from the family according to its formulation — reinforcement, flame retardant and filler content all change these numbers. This is exactly why each grade sheet carries its own values, and why the grade sheet is what we quote from.
| Property | Reference value | Test standard |
|---|---|---|
| Density | 1.24 g/cm³ | ISO 1183 |
| Tensile Strength | 60 MPa | ISO 527 |
| Flexural Modulus | 3500 MPa | ISO 178 |
| Heat Deflection Temperature (HDT) | 55°C | ISO 75 |
| Continuous Use Temperature | 50°C | UL 746B |
| Flammability Rating | UL94 HB | UL 94 |
Measured properties for Ingeo 6100D
These are the values recorded against Ingeo 6100D itself, taken from its own technical data sheet and shown with the standard each was measured under. A number without its standard is not comparable between suppliers, which is why the standard sits next to every figure. Where the datasheet gives a range, the range is reproduced as reported rather than collapsed to a single number.
| Property | Value | Test standard |
|---|---|---|
| Density | 1.24 g/cm³ | ASTM D792 |
| Elongation at Break | 10 - 70 % | ASTM D2256 |
| Melting Point | 165 - 180 °C | ASTM D3418 |
| Glass Transition Temperature (Tg) | 55 - 60 °C | ASTM D3417 |
| Mould Shrinkage | 3 - 10 % | ASTM D2102 |
These are grade-specific values rather than family reference figures. Where a property is missing from this table, we do not hold a recorded value for it on this grade — we leave it out rather than fill the gap with a family number.
Supply terms for PLA sit in the commodity pricing band, sold as PLA pellets in 25 kg bags, FOB Shanghai, normally ready to ship within 7 working days, with a minimum order of 500 kg. Test samples are available against a live enquiry.
Request a quote — 24h replySupply Information
Huizhou Lingli Trading supplies PLA grades in 25kg bags, FOB Shanghai. TDS on request; RoHS / REACH documentation availability is recorded per grade — see above. MOQ 100kg, samples for testing.
Request Quote (24h reply)Why Huizhou Lingli Trading
- Direct sourcing from China tier-1 producers
- Multi-grade inventory in Shanghai bonded warehouse
- FOB Shanghai, CIF main ports worldwide
- Free sample for qualified buyers
- 24h quote, 7-day sample dispatch