Home Products About ContactFAQ [email protected]

Home › PET › PET FR

PET FR 阻燃 PET · PET Flame Retardant

电子电气阻燃件

About This Grade

PET FR (阻燃 PET, PET Flame Retardant) — PET is a versatile semi-crystalline polyester used in bottle, fiber, and engineering applications. PET offers excellent clarity, high tensile strength, good chemical resistance, and is 100% recyclable

Key Applications

Other PET Grades

Grade中文名English NameNote
PET Bottle瓶级 PETPET Bottle Grade饮料瓶、食用油瓶 |
PET Fiber纤维级 PETPET Fiber Grade涤纶短纤、长丝、纺纱 |
PET Eng工程级 PETPET Engineering Grade汽车结构件、高强度托架 |

Related Grades

Choosing within the PET range

PET is one of 4 grades we catalogue in this family, and they are not interchangeable. The differences between them are not marketing variations: they are different formulations solving different problems, and picking the wrong one shows up later as a warpage, a creep, or a connector that will not hold its seating.

This page covers PET FR (PET Flame Retardant). The grades listed below are the other options in the same family, and each one is a deliberate step away from the plain grade.

GradeNameWhere it is used
PET BottlePET Bottle Grade饮料瓶、食用油瓶details ›
PET FiberPET Fiber Grade涤纶短纤、长丝、纺纱details ›
PET EngPET Engineering Grade汽车结构件、高强度托架details ›

Two practical rules when reading that table. First, a reinforced grade is not simply a better grade — glass fibre changes the shrinkage and the flow, so a reinforced grade usually means a different mould, not the same mould with better resin. Second, where a family offers both a flame-retardant and a plain grade, the flame retardant is the one to specify if the part ends up inside a powered enclosure, and the plain grade is the cheaper answer everywhere else. If the application does not decide it for you, tell us the end use and we will work back to the grade.

We would rather quote you the grade that fits than the grade that is easiest for us to ship.

What this grade is for

Every PET grade in our catalogue is filed against the same application set, because the family itself, not the individual variant, determines where it goes. The variant decides how it behaves there — how stiff it is, how it flows, how it handles heat. That is why the note above is the one-line answer and the rest of this page is the reasoning.

The family behind this grade

PET is a versatile semi-crystalline polyester used in bottle, fiber, and engineering applications. PET offers excellent clarity, high tensile strength, good chemical resistance, and is 100% recyclable

In practice the family shows up in beverage bottle preforms, synthetic fiber filament, thermoformed food packaging trays and the wider set of 5 applications the PET plant is qualified for. The material we quote is drawn from SABIC PET BC112/CC442, Dak Americas Laser+, Indorama PET and comparable sources — the specific manufacturer is confirmed against your order rather than assumed in advance.

How the same application is solved in other families

The applications below are not exclusive to PET. Where another family solves them too, that is usually the more useful comparison for you, because it tells you what you are trading away when you settle on PET.

ApplicationFamilies covering itOther options
Beverage bottles1only offered in this family
Polyester fiber/textile1only offered in this family
Thermoformed packaging1only offered in this family
Food containers1only offered in this family

Documentation and supply

Compliance for PET FR is recorded as EU 2011/65/EU, EU 1907/2006 — each one attaches to this grade, not to the polymer in general.

Where a standard is still open on our side we say so before you order rather than after. Ask us for the specific document type and grade and we will tell you plainly what we can and cannot supply.

Family reference properties

The figures below are the PET family reference values, not the measured properties of PET FR itself. A grade moves away from the family according to its formulation — reinforcement, flame retardant and filler content all change these numbers. This is exactly why each grade sheet carries its own values, and why the grade sheet is what we quote from.

PropertyReference valueTest standard
Density1.40 g/cm³ISO 1183
Tensile Strength75 MPaISO 527
Flexural Modulus3000 MPaISO 178
Heat Deflection Temperature (HDT)170°CISO 75
Continuous Use Temperature130°CUL 746B
Flammability RatingUL94 HBUL 94

Measured properties for PET FR

These are the values recorded against PET FR itself, taken from its own technical data sheet and shown with the standard each was measured under. A number without its standard is not comparable between suppliers, which is why the standard sits next to every figure. Where the datasheet gives a range, the range is reproduced as reported rather than collapsed to a single number.

PropertyValueTest standard
Density1.63 g/cm³ASTM D792
Tensile Strength128 MPaASTM D638
Tensile Modulus11655 MPaASTM D638
Elongation at Break2 %ASTM D638
Heat Deflection Temperature (HDT)222 °CASTM D648

These are grade-specific values rather than family reference figures. Where a property is missing from this table, we do not hold a recorded value for it on this grade — we leave it out rather than fill the gap with a family number.

Supply terms for PET sit in the commodity pricing band, sold as PET pellets in 25 kg bags, FOB Shanghai, normally ready to ship within 5 working days, with a minimum order of 1000 kg. Test samples are available against a live enquiry.

Request a quote — 24h reply

Supply Information

Huizhou Lingli Trading supplies PET grades in 25kg bags, FOB Shanghai. TDS on request; RoHS / REACH documentation availability is recorded per grade — see above. MOQ 100kg, samples for testing.

Request Quote (24h reply)

Why Huizhou Lingli Trading